Surface acidity of novel mesostructured silicas with framework aluminum obtained by SBA-16 related synthesis

A novel SBA-16-related synthesis of mesostructured silica containing framework aluminum is reported here. This material was successfully synthesized using aluminum sulphate and the pH-adjusting method. The structural and porosity properties of this novel material were studied by X-ray diffraction and N₂ adsorption at 77 K. The Al insertion was determined by ²⁷Al-MAS-NMR and the acidity was monitored by infrared spectroscopy of CO adsorption at 100 K.     

Comparison of glycemic index of spelt and wheat bread in human volunteers

The assessment of the glycemic index (GI) seems to be an important parameter to take into account in order to better understand the physiologic effects of foods with high carbohydrate levels. Among cereals, which are major sources of carbohydrates, spelt (Triticum spelta L.) has been considered as particularly interesting from a nutritional point of view. The aim of this study was to evaluate in vivo the GI of white spelt bread in healthy subjects. The wheat (Triticum aestivum L.) white bread was used as reference food. To avoid differences in the production of both breads, spelt and wheat breads were baked under the same controlled conditions. Results showed that the glycemic profile of spelt white bread was not different from that of wheat white bread (GI of 93 ± 9). The area under the glycemic curve significantly and negatively correlated to fasting glycemia and carbohydrate intake during evening meals preceding the test. In conclusion, the glycemic response to spelt bread was similar to that of wheat bread. However, in order to avoid more inter-individual variability, our data supports the importance to propose standardised carbohydrate content for the last meal before evaluating the GI of food.     

A rapid spectroscopic method to detect the fraudulent treatment of tuna fish with carbon monoxide

Carbon monoxide (CO) can be used to treat fresh meat and fish in order to retain its ‘fresh’ red colour appearance for a longer period of time. In fact, upon aging, myoglobin is oxidized to met-myoglobin with the concomitant blue-shift and broadening of the Soret maximum, which brings about a change in the colour of the fish, revealing that it is no longer fresh. The use of carbon monoxide, which reacts with the oxy-myoglobin to form a fairly stable cherry red carboxy-myoglobin complex may mask spoilage, because the CO-complex can be stable beyond the microbiological shelf life of the meat. The presence of CO in tuna fish has been investigated by optical spectroscopy as the formation of the CO adduct can be easily detected by the combined analysis of electronic absorption spectra in their normal and second derivative modes, monitoring the intense Soret band at 420 nm. The presence of met- and oxy-myoglobin can obscure the presence of small amounts of the CO adduct; however, it can be revealed by chemically reducing the met- and oxy-forms to the deoxy-form in an anaerobic environment. This spectroscopic method provides a qualitatively rapid laboratory screening procedure for food control to unmask the presence of CO in frozen or fresh fish.     

Crashworthiness of helicopter subfloor structures

To improve a helicopter design concept, which meets structural and crashworthiness requirements, a research program is undertaken to study the energy absorption capability of a subfloor structure. In particular, crash tests are performed on the subfloor structure and on the intersection elements, which are components of the structure and can create high deceleration peak loads at the cabin floor level causing dangerous inputs to the occupants. Then the structures are analysed by a commercial explicit finite element code, PAM-CRASH, using detailed geometrical models, suitable materials models and the appropriate definition of contact forces and rivets. The analysis shows that the load-shortening diagrams present a good correlation to the experimental data and that the structural collapse predictions correspond closely to the observed behaviour during the experimental tests. Consequently the finite element analysis can be used to aid the designers in evaluating the crashworthiness of different structural concepts and can therefore be an important mean of reducing development costs.     

On the main flow features and instabilities in an unbaffled vessel agitated with an eccentrically located impeller

The hydrodynamics of an unbaffled vessel stirred by an eccentrically located Rushton turbine is investigated with both Laser Doppler Anemometry and flow visualisation techniques. The flow field is shown to be characterised by a strong circumferential motion which develops itself around two main vortices, one above and one below the impeller, both inclined with respect to the vertical plane. Such vortices are not steady but move periodically very slowly in comparison to the impeller rotational timescale. Accordingly, two low frequency components, whose values are linearly dependent on the impeller rotational speed, are identified across the vessel. The energetic contribution to the turbulent kinetic energy of such flow instabilities is significant so that they should be taken into account when evaluating micro-mixing information from turbulence quantities. Besides, an additional low frequency component is observed and related to vortex shedding phenomena from the flow-shaft interaction which occur in eccentric agitation operation. The flow discharged from the impeller is also measured and discussed.     

The Effect of Electrospun Gelatin Fibers Alignment on Schwann Cell and Axon Behavior and Organization in the Perspective of Artificial Nerve Design

Electrospun fibrous substrates mimicking extracellular matrices can be prepared by electrospinning, yielding aligned fibrous matrices as internal fillers to manufacture artificial nerves. Gelatin aligned nano-fibers were prepared by electrospinning after tuning the collector rotation speed. The effect of alignment on cell adhesion and proliferation was tested in vitro using primary cultures, the Schwann cell line, RT4-D6P2T, and the sensory neuron-like cell line, 50B11. Cell adhesion and proliferation were assessed by quantifying at several time-points. Aligned nano-fibers reduced adhesion and proliferation rate compared with random fibers. Schwann cell morphology and organization were investigated by immunostaining of the cytoskeleton. Cells were elongated with their longitudinal body parallel to the aligned fibers. B5011 neuron-like cells were aligned and had parallel axon growth when cultured on the aligned gelatin fibers. The data show that the alignment of electrospun gelatin fibers can modulate Schwann cells and axon organization in vitro, suggesting that this substrate shows promise as an internal filler for the design of artificial nerves for peripheral nerve reconstruction.     

Assessment of daylight in rooms with different architectural features

Results are presented from a parametric study that assessed the amount of daylight in rooms with different architectural features: the orientation, window size and visible glazing transmittance, room depth, external obstruction angle and site. Annual lighting simulations were run in order to understand how the daylight availability within a space changes as a function of the architectural features. A sub-dataset of the full result database is examined in detail for north- and south-facing rooms in Turin, north-west Italy, with a visible glazing transmittance of 70%. Each feature is analysed for its influence on the daylighting conditions. A simple graphical tool is presented to promote an easier reading of the results. This was developed to provide a synthesis of information to the design team. It shows the influence of preliminary design solutions on the amount of indoor daylight. This allows a design team to assess indoor daylighting from the earliest design phases onwards and to determine which combinations of architectural features are able to provide high, acceptable or low daylight levels within a room.     

New Blended Cement from Polishing and Glazing Ceramic Sludge

Waste generated in ceramic tiles manufacturing is not usually recycled inside the productive plant, but rather disposed to landfill. This paper deals with ceramic residues from polishing and glazing processes, as constituents for innovative blended cements. New binders made up of 75% CEM I 52.5 R and 25% residues were chemically, physically, and mechanically characterized with reference to EN 197-1 requirements and the results compared with ordinary Portland cement. Mechanical strength development and microstructure of the relevant mortar have been investigated up to 90 days of curing, and the behavior of polishing and glazing residues as cement constituents is reported.